The most recent revolution in the steel sheet piling industry started in 2004 with the initial version of the AZ 38 700. It was the first 700 mm wide hot rolled Z-section that instantly made his way into the sheet piling market. 14% of weight reduction, reduced installation time due to its high width, higher stiffness,…

Commercial RPS launches the “General catalogue 2010” and “The new HZM Steel Wall System: HZM / AZ” in Spanish and Portuguese

Ein sicherer Hafen – auch für die ganz Großen

Mit dem Neubau des JadeWeserPorts in Wilhelmshaven bekommt Deutschland seinen größten Tiefseehafen – der zudem Container-Schiffen einen einmaligen Premium-Service bietet. Für die Stabilität der Kajenanlagen sorgen Spundwände von ArcelorMittal..

Rochester Riverside is a flagship project in the UK within the Medway Council regeneration programme.

Straight web steel sheet piles have been produced for more than 100 years already and are used successfully in large civil engineering projects on worldwide scale. They are designed to be used as circular or diaphragm cell retaining structures.

Porto Amboim | Angola, Paenal fabrication yard

As part of the construction of the railway line between Erfurt and Leipzig / Halle, the longest railway bridge in Germany is created south of Halle from 2006 to 2012.
At its completion, it will secure the traffic flows from Nuremberg to Berlin and from Frankfurt / M. to Dresden.

The new GU N and GU S sections have already been rolled, and replace the existing GU  600 range from beginning of June 2009 on.

The 2009 English and Russian editions of our ‘General catalogue’ are available for downloading and for  dispatching, as well as a new ‘Image’ brochure about our company

In 2007 a group of local investors decided to start working on the project "Marina Pez Vela". The 308 slip marina will feature one of the most  sophisticated breakwaters ever built for a recreational marina, providing a safe harbour and hurricane protection.

After its revamp in 2007, the rolling mill in Rodange managed to launch successfully the new PU-R range in 2008, starting in March with the PU 8R, then in June rolling the PU 10R, and later in September the PU 14R.
 

Rehabilitation of the "French Quay", Port of Kamsar

First German project utilizing the „Giken ECO 700S“ hydraulic press with the AZ‑700 range

Two new versions of our ‘General catalogue 2008’ will be available for dispatching beginning of January 2009.

It was out of stock for a moment, but owing to the many requests received lately, we decided to print a revision of our worldwide renowned ‘Piling Handbook’...

The project extension of the airport Leipzig – Halle has already started and is on track.

The railway company is currently rehabilitating the train station at ‘Belval – Mill’ in Luxembourg. Steel sheet piles have once again been chosen as a retaining wall for the new quay structure.

Launching port for offshore wind turbines

Due to high energy prices, the world is currently experiencing a run on alternative energies. Germany boasts the planet's largest number of wind farms totalling an annual energy production of 20.000 MW in 2007.

First project in Germany with 700 mm wide Z-piles installed with a free-riding hydraulic press.

ArcelorMittal has further good news to share about the HZM system...

Rolling of the PU 8R, the first sheet pile of the new PU-R range, took place in March 2008, and the first sheet piles have already been supplied.

The first rollings of a new steel sheet pile section are always a challenge for a mill, especially after a revamp.

Our company has been through a number of changes in these last years. For instance, new sheet pile sections were introduced, older sections were removed from our rolling program...

We announced in 2007 that we were developing a more cost-effective HZ combined wall system

ArcelorMittal is striving to match its offer to the requirements of its professional partners, and the latest proof of this success is the high demand for the AZ 38-700 sheet pile section.

A few weeks ago, we announced the future range of PU-R steel sheet pile sections that are intended to replace the low-end range PU sections. The new PU 7R and PU 10R will be rolled beginning of 2008. PU 14R will be introduced after those two sections: availability mid 2008.

ArcelorMittal assessed years ago that the introduction of its new sections, combined with the efforts to develop new markets and new applications, would lead to a significant increase of steel sheet pile demand. The first step was to dedicate its Mill 2 in Esch-Belval exclusively to the production of steel sheet piles

Revised edition of the brochure...

We have been working hard to collect a large amount of information regarding modern port structures that were built with steel sheet piling. A large number of contractors, project owners, consultants and our sales agencies contributed to this new brochure.

New AZ12-770 & AZ20-700 Canal embankment for a new housing complex Sportparklaan, Maarssen, The Netherlands

Arcelor Mittal is once again proud to announce that our ‘Mill 2’ in Belval, Luxembourg, has successfully started the industrial production of a new steel sheet pile: the new AZ13‑770.
 

New brochure: It provides assistance in the fire safety design of steel sheet piles...

Due to the huge success of the AU-series and more particularly the AU 16, the production of the PU 16 will be stopped at the end of the year. The AU 16 with its weight advantage of 8 % and its increased width will be his substitute.

Due to the tremendous success of AU 20, production of PU 20 will be stopped by the end of this year. PU 20 will then be replaced by AU 20.