Surface appearance for different conditions
| Conditions | Designation Stainless Europe |
Description of surface finish | International equivalents |
|
| ASTM | EN 10088 | |||
|---|---|---|---|---|
| HR | HRAP | Hot-rolled, anne and pickled | N1 | 1D |
|
DIN Embossed
DIN Embossed
|
Hot-rolled with embossed DIN tear-plate Pattern, annealed and pickled | 1M | ||
|
ASTM Embossed
ASTM Embossed
|
Hot-rolled with embossed ASTM tear-plate Pattern, annealed and picked | Pattern B | ||
| CR ANNEALED |
HRC | Cold-rolled, rough, matt | 2E | |
| 2D | Cold-rolled, annealed and pickled, not skin passed | 2D | 2D | |
|
2B
2B
|
Cold-rolled, annealed, pickled and skin passed | 2B | 2B | |
|
2R
2R
|
Cold-rolled, bright-annealed and skin passed | BA | 2R | |
| CR WORK HARDENED |
Work hardened(9) |
Cold-rolled without subsequent anneal for various hardness levels | TR | 2H |
| CR ANNEALED |
No.3 or P80D
No.3 or P80D
|
No. 3 polished / Dry polished with 80-grit abrasive belts | No.3 | 2G |
|
No.4 or P120D-P150D
No.4 or P120D-P150D
|
No. 4 polished / Dry polished with 120/150 -grit abrasive belts | No.4 | 2G | |
|
No.5 or P180D-P220D
No.5 or P180D-P220D
|
No. 5 polished / Dry polished with 180/220 - grit abrasive belts | 2G | ||
|
No.6 or P240D
No.6 or P240D
|
No.6 polished / Dry polished with 240 - grit abrasive belts | 2G | ||
|
No.7 or P320D
No.7 or P320D
|
No. 7 polished / Dry polished with 320 - grit abrasive belts | 2G | ||
|
P400D
P400D
|
Dry polished with 400 - grit abrasive belts | 2G | ||
|
Duplo P220
Duplo P220
|
Dry polished with 220 - grit abrasive belts + brushed with wire rolls | 2G | ||
| Duplo P320 | Dry polished with 320 - grit abrasive belts + brushed with wire rolls | 2G | ||
| Brushed Uginox | Brushed with abrasive belts | 2J | ||
|
Scotch-Brite
Scotch-Brite
|
Lightly brushed with wire rolls | 2J | ||
| CR ANNEALED |
TT3
TT3
|
Etched linen finish obtained by cold rolling with special rolls, followed by a final anneal | 2M | |
|
UGISAND
UGISAND
|
Finish obtained by etching with special rolls | - | - | |
|
UGITOP
UGITOP
|
Matt low-reflectance finish obtained by cold rolling with special rolls | 2D | 2F | |
|
UGIPASS
UGIPASS
|
Matt finish obtained by cold rolling with special rolls | 2D | 2D | |
|
UGIBAT
UGIBAT
|
2B finish for construction industry | 2B | 2B | |
|
UGILINE
UGILINE
|
Etched matt satiny | |||
|
UGIBRIGHT
UGIBRIGHT
|
2R finish for construction industry | BA | 2R | |
| CR WORK HARDENED |
UGITEX
UGITEX
|
Shotpeened finish obtained by cold rolling with special rolls | 2M | |
|
TG5
TG5
|
Etched textured finish obtained by cold rolling with special rolls | 2M | ||
| CR ANNEALED |
UGINOX Tinplated
UGINOX Tinplated
|
Surface coated with a continuous layer oftin in a accordance with standard NFA 36332 | 2S | |
| CR ANNEALED | Aluminised | Surface coated with a continuous layer of aluminium | 2S | |
(9) This table does not take into account the availability of grades or dimensional restrictions: check with your sales contact.
Download the chart in PDF (238 Ko)